• 2191 Williams Street, San Leandro, CA 94577
  • (510) 351-9600
  • Follow

Facility List

Facility 6,000 Square Feet Full temperature Control

  • Wire EDM:
  • Sodick AG 400
  • X - Axis Travel 15.75" (400 mm)
  • Y - Axis Travel 11.81" (300 mm)
  • Z - Axis Travel 9.84" (250 mm)
  • U, V Axis Travel 4.72" x 4.72" (120 x 120 mm)
  • Wire Diameter Range (min ~ max) 0.004" ~ 0.012"
  • Work Tank Dimensions (W x D) 33.45" x 24.02"
  • Maximum Workpiece Weight 1,102 lbs
  • Sodick A500
  • X - Axis Trave l 19.69"
  • Y - Axis Travel 13.80"
  • Z - Axis Travel 9.84"
  • U, V Axis Travel 1.96" x 1.96"
  • Wire Diameter Range (min ~ max) 0.004" ~ 0.012"
  • Work Tank Dimensions (W x D) 30.0" x 36.0"
  • Maximum Workpiece Weight 1,500 lbs
  • Sodick AP325
  • X - Axis Travel 13.80"
  • Y - Axis Travel 9.84"
  • Z - Axis Travel 9.84"
  • U, V Axis Travel 1.96" x 1.96"
  • Wire Diameter Range (min ~ max) 0.004" ~ 0.012"
  • Work Tank Dimensions (W x D) 32.0" x 26.0"
  • Maximum Workpiece Weight 1,102 lbs (500 kg)
  • Sinker EDM
  • 3x Sodick MM3 Mark 21 40 amp
  • Travel 12.0 x 8.0 x 10.0
  • Work Tank Dimensions (W x D) 36.0" x 20.0"
  • Maximum Workpiece Weight 1,102 lbs (500 kg)
  • Sodick MM5 Mark 22 80 amp.
  • Travel 20.0 x 14.0 x 14.0
  • Work Tank Dimensions (W x D) 44.0" x 32.0"
  • Maximum Workpiece Weight 1,500 lbs
  • Mitsubishi EA28V 120 amp
  • Travel 25.6 x 17.7 x 13.8
  • Work Tank Dimensions (W x D) 43.3 x 31.9 x 17.7
  • Maximum work piece: 4400 lbs.
  • Small hole EDM:
  • Sodick K1CN
  • Travel 12.0 x 8.0 12.0
  • Machining:
  • Haas VF2ss 30.0 x 16.0 x 20.0 12,000.00 RPM 45,000 RPM air spindles 2x
  • Okuma Cadet Mate 40.0 x 20.0 x 20.0
  • 3x Bridgeport Mills
  • Goodway Lathe 14.0" swing x 40"
  • Design and programing:
  • Surfcam 2 axis plus
  • Surfcam 3 axis plus
  • Geopath Wire EDM
  • SolidWorks 2007
  • Grinding:
  • Okomoto 12 x 24
  • Harig 6 x 18
  • Norton 6 x 18
  • Maxo 6 x 12
  • 2x Deckel SO cutter grinders
  • Inspection:
  • Mitutoyo Crysta-Plus443 CMM
  • Surface plate 3' x 5'
  • Surface plate 3' x 4'
  • Surface gages and stands to 18.0"
  • Certified gage blocks and gage pins .0050-1.0000
  • Rockwell Hardness Tester
  • Deltronic Optical comparator 14" W/.0001 digital readout

Location

2191 Williams Street, San Leandro, CA 94577
Phone: (510) 351-9600
Fax: (510) 351-9601

Hours of Operation

Monday - Friday, 7 a.m. - 4 p.m.

CONTACT US

Captcha